Make
your own durable, castable "peanut"—a tiny
tube lure that brings nonstop action on the cheap.
By George Poveromo
Inspiration struck as i
tinkered with my tackle one afternoon. Just a few days
earlier, I had enjoyed great light-tackle sport with
school dolphin, catching them on bucktails. But the fish
quickly destroyed the lures and grew wise to the
succession of colors we pitched to them, eventually
forcing us to switch to ballyhoo chunks and finally live
bait to keep the bite going.
What I needed was a lure
that would be as effective as a bucktail, yet more
durable. I recalled pitching tube lures to big barracuda
over the patch reefs of the Florida Keys, and was amazed
at how rugged that surgical tubing was, even after a day
in the toothy maw of 'cuda after 'cuda. On a whim, I
matched some tubing with a fish-tested bucktail and cut a
four-inch length to mimic the profile. To equal the heft
that provides the superior casting distance of the
bucktail, I stuck an egg sinker into one end of the tube.
The "peanut"
was born.
Peanut
Gets Shelled
What I found on the next several dolphin outings, and over
the ensuing years, was quite impressive. The Poveromo
Peanut—as my friends had affectionately dubbed my
creation—cast far enough to reach the dolphin without
having to bring the boat too close—just like a bucktail—and
when reeled in quickly, the lure had a super fleeing-type
action that drove fish mad. The peanut held up after many
battles with only minor scuffing—I just had to touch up
the hooks with a hone to keep them sharp after tangling
with a few fish.
Because the tube material
comes in solid colors, including yellow, blood red,
orange, green, chartreuse, opaque and black, I can fashion
a variety of lures to keep the dolphin interested for
quite awhile. In addition, there is no paint to chip or
dressing to fall off its simple, durable tubular body.
The materials cost hardly
anything, so the biggest investment was the time it took
to make the lures (see "Soup to Nuts," page 40).
Best of all, the peanut catches a wide variety of gamefish—both
inshore and offshore. Over the years it has caught Spanish
and cero mackerel, bluefish, jack crevalle, bonito,
blackfin tuna and even a seatrout. Although we have used
it primarily for school dolphin, larger versions entice
bigger game, such as cobia, striped bass, barracuda and
amberjack.

A LITTLE NUTS: The peanut packs a wallop.
Photo: George Poveromo
Action
and Enticement
Depending on the target species and angling situation, I
have found that the lure responds to different retrieves
with enticing actions. To get the most out of my
handiwork, I use the peanut in one of three ways:
Casting: For
school dolphin, I prefer casting the peanut far out, then
holding the rod above my head and reeling as quickly as I
can. The high rod angle and speedy retrieve combine with
the flat face of the lure to create attention-getting
splashes as the peanut skips across the surface—just
like a fleeing fish. Dolphin see this and come charging
after it, striking aggressively.
Once the dolphin cool
down on that retrieve, I'll cast the lure far out, let it
sink for several seconds and then retrieve it rapidly
beneath the surface. I'll hold the rod parallel to the
water and frequently jig the peanut as I reel. The peanut
tracks straight, lunging forward with each jig. This
action will fire up the fish again, and will even incite
strikes from those fish that were wary of the fast-moving
retrieve on the surface. In addition to dolphin, I have
also taken bluefish, mackerel and jacks this way.
Jigging: Another
productive tactic is to jig the peanut. Cast it out and
let it sink for a minute or so. Then begin a steady,
moderate retrieve, highlighted by sharp lifts and drops of
the rod, which provides a vertical, darting movement.
To get even more action
on the jig, let the lure sink, then wind up the slack,
pausing as you jerk the rod tip up. Reel quickly as you
drop the rod, repeating the process all the way back to
the surface—giving the lure plenty of motion. Use this
retrieve to find dolphin suspending in the water column,
and you may also discover it attracts amberjack, cobia,
barracuda and even grouper and snapper, if you fish it
right off the bottom.
Trolling: The
peanut also can be trolled for small tuna and bonito that
are schooled up and feeding at the surface. These spooky
fish are often too far away to reach with a cast.
A way around that is to
pay out 200 to 300 yards of line, to give the fish a wide
berth, and troll a small spread of peanuts past the
leading edge of a school. The little tube lure resembles
the small bait closely enough to produce strikes, while
the far-off boat seems to draw no notice.
I often place a peanut in
my trolling spread—it seems to find school dolphin
anytime and the swivel prevents line twist.
The next time you're
looking for a lure to do it all, try a Poveromo Peanut.
Its range of colors and actions will catch a variety of
gamefish. And it certainly will have no problem going the
distance.
Soup
to Nuts
Use this step-by-step guide to make your own peanut.

WHAT YOU NEED: four-inch section of surgical tubing, egg
sinker to fit snugly in tube, eight-inch length of
200-pound-test No. 12 wire, 3/0 long-shank hook, barrel
swivel and indelible marker.
Photo: Illustration: Pete Sucheski
1 Add a drop of
reel oil to the egg sinker and twist it into a
four-inch section of tube. Hint: Put the sinker against
the floor and push on the tube until it slides in.
2 Make a cut
in the tube with the point of a knife, about
three-quarters of the way back.
3 Slide the No.
12 wire through the eye of the sinker and out the
small incision in the body. Use a haywire to twist a 3/0,
long-shank hook to the wire.
4 Pull the wire
and hook back up into the body and make sure the twist
abuts the sinker. Check for binding by holding the lure
head and pulling on the wire. The lure's head should
absorb the strain. If the hook pulls tight against the
body, lengthen the incision in front of the bend to
relieve the pressure.
5 Finish
by trimming excess leader wire and haywire-twisting the
swivel to the leader. Draw eyes and gill slits. Experiment
with other markings, or cut the trailing edge of the tube
into flaps for added action.
— G.P
|